Sea Recovery Watermakers

 

Sea Recovery Aqua Matic

Performance Characteristics

APPLICATION Leisure Marine
CONFIGURATION Compact
PERFORMANCE +-15% at 820 PSI / 57 BAR, 77°F / 25°C & 35,000 PPM TDS typical sea water
WATER FLOW RATE 700 Gal/day
2,650 L/day
PUMP TYPE Exclusive high efficiency Booster Pump;Optional Patented High Pressure Quintiplex Radial Axial Plunger Pump is water lubricated, does not require oil changes and operates 8,000 hours between required maintenance
REVERSE OSMOSIS MEMBRANE TYPE Selected High Rejection/High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass, high rejection reverse osmosis membrane element
FILTER TYPE Sea Strainer with a cleanable Monel Mesh Screen filter, Charcoal Filter Assembly, Commercial Prefilter, and Oil Water Separator
POWER SOURCE AC
PRESSURE ADJUSTMENT CONTROL TYPE Automatic
MINIMUM INLET PRESSURE RATING 1/2″ MNPT (Male National Pipe Thread, Amer. Std)
SALT REJECTION 99.2, Average 99.4 %
SALINITY MONITORING Automatic electronic monitoring. Temperature compensated with the digital continuous readout. The salinity monitoring components of the system give a continuous TDS readout in ppm (parts per million), are temperature compensated, and of a fail safe design.
SALINITY RANGE Designed for seawater use up to 50,000 PPM TDS (NaCl) (typical seawater salinity is 35,000 ppm)
WATER FEED TEMPERATURE RANGE Max. 122°F / 50°C, Min. 33°F / .5°C
OUTPUT WATER TEMPERATURE RANGE Ambient to feed water temperature
FEED WATER FLOW RATE 4.5 gpm / 17 lpm (depending on system)
CHLORINE TOLERANCE 0.1 ppm
PH RANGE 3-11 (typical seawater pH is 8)
PRESSURE RATING Feed Water: Maximum 35 psi / 2.41 bar / 2.46 Kg/cm2
OPERATION TYPE Seawater nominal 820 psi / 56.5 bar / 57.66 Kg/cm2
WEIGHT 156 lbs / 71 Kg
HEIGHT 17″ / 421 mm
WIDTH 18″ / 457 mm
LENGTH 37 15/16″ / 964 mm

 

Download PDF Spec Sheet

Address

Bluewater
1815 Mast Tower Road
Vancouver, BC, V6H 3X7

Contact Info